1.Oilfield Services industry .
Oil acid sang tak tak lipophilic group te chu oil phase nen an inmil a,hydrophilic group te chu tui phase nen an inzawm laiin,water-in{{1}oil (w/o) emulsion an siam a.
Hei hian high-temperature stability,lubricity, leh cuttings-a tichak a, drilling fluids te hian an phur thei a ni.
Complex formations(high-temperature, high-salinity, leh high calcium-magnesium ion environments ang chi), wellbore collapse risk reduced, drill bit leh wellbore inkara frictional resistance tihtlem te tan a tha a, drill bit-a service life pawh a ti rei bawk.
Oil acid sang tak fatty acid structure hian crude oil-a wax leh colloid awmna emulsification system nghet tak a siam thei a,Crude oil viscosity a ti tlem thei bawk.
Emulsifier emaw viscosity reducer angin,Crude oil fluidity siam that nan an hmang thin.
Chu bakah,chuan, crude oil emulsion stability tichhe turin surface activity a hmang a,chu chuan tui droplet te chu coalesce leh settle-a thlen tir a, crude oil leh tui inthenna thlen tir, leh crude oil dehydration efficiency tihchangtlunna, chu chu crude oil gathering leh transportation processing links-a hman tlanglawn tak a ni.
|
Thil |
Test dan tur . |
Specifications 1.1. |
Nghawngchhuah |
|
iodine hlutna . |
GB/T9104.1 a ni. |
110GI2/100G min a ni. |
115GI2/100G a ni. |
|
A rawng(Fe-co) . |
GB/T1722 a ni. |
4 max a ni. |
<4 |
|
Acid value 1000 a ni. |
GB/T9104.3 a ni. |
195-209 mgkoh/g a ni. |
198.6 mgkoh/g a ni. |
|
Saponification hlutna . |
GB/T9104.2 a ni. |
196-208 mgkoh/g a ni. |
205.9 mgkoh/g a ni. |
|
Solidifying point 1000 a ni. |
GB/T9104.5 a ni. |
8℃a ni. |
4.5℃a ni. |
|
Tuihu |
GB/T9104.6 a ni. |
0.3% Max a ni. |
0.1% |
2. Mineral hmanga thil siam chhuahna industry .
Carboxyl group of tall oil acid hian coordinate bonds a siam thei a, chu chu oxidized ores chunglamah metal ion neiin(iron ores, rare earth ores, apatite ang chi), bubble hmanga flotation awlsam tak siam turin hydrophobic a siam thei a ni.
Mineral surface-ah a adsorb a, mineral leh bubble inkara binding ability a tichak a, flotation efficiency a ti tha hle.
3.Coatings industry .
Alkyd resin siam dan:
Alkyd resins siam chhuahna atana raw material pawimawh tak,polyols (eg, glycerin, pentaerythritol) leh polyacids (eg, phthalic anhydride) hmanga reacting.
Heng resins te hian film tha tak tak-forming property, gloss, leh weather resistance te an nei a, architectural coatings, industrial coatings, leh wood coatings-ah te hman vek a ni.
Coating additives te chu:
TOFA hian drying speed, flexibility, adhesion, leh tui resistance a ti tha hle.
Entirnan, TOFA chu latex paints-a dahin, bangte adhesion a tichak a, coating film-a scrub resistance .
In ink production,TOFA hi ink binder siam nan hman a ni.
Chemical dang nena reaction hmangin,binders fluidity tha tak, transferability, leh drying property nei te a siam a,printing laiin substrate-a uniform ink transfer a, print leh clear prints a siam a, ink drying speed leh rub resistance a ti tha bawk.
4.Rubber Industry .
Vulcanization activator:Natural leh synthetic rubber-te vulcanization-a vulcanization activator angin,tofa chuan rubber leh vulcanizing agents inkara reaction a tichak a,accelerates vulcanization,increases cross-link density of vulcanizates, leh physical{{1}mechanical properties of rubber products.
Plasticizer:Plasticizer angin Tofa hian rubber hardness leh viscosity a ti tlem a, flexibility leh plasticity a tichak a,mixing leh molding a tichak a, rubber products cold resistance leh flex resistance a ti tha bawk.
5.Plastics industry .
Plasticizer leh lubricant:Plastic leh lubricant atan hman a ni a, plastic hrang hrangah PVC leh PS.
Plasticizer angin plastic-a intermolecular force a tihtlem bakah, flexibility, ductility, leh plasticity a tichak a ni.
Lubricant angin plastic leh processing equipment inkara inhnawh tawnna a tihziaawm a,energy hman a hniam zawk a, processing efficiency a ti tha a,plastic products te surface finish leh demolding property a ti sang bawk.
Stabilizer: 1.1.
PVC processing-ah chuan, metal soap stabilizers nena hman a nih chuan,tofa chuan PVC thermal leh light stability a ti tha a, tar, rawng danglam, leh processing leh hman laiin khaw lum leh light avanga lo awm, plastic products service life a ti rei a ni.
6.Daily chemicalindustry .
Surfactants:chemical dang hmanga reacting,tofa hian surfactant hrang hrang(eg, fatty acid salt, esters, amides), detergents, textile auxiliary, oilfield chemicals, etc.-a hman zau tak, emulsification, dispersion, washing, leh foaming-a hman theih a ni.
7.Metalworking industry .
Lubricant additives: Lubricant additives angin,tofa hian lubrication, oxidation resistance, leh lubricants te rust resistance, mechanical wear tihtlem leh hmanrua dam rei theihna a siam tha.
8.Energy chemical industry .
Biofuels:A dang tih zawh hnuah,tofa hi biodiesel siamna atana raw material atan a tangkai thei.
Transesterification hmangin,fatty acids te chu fatty acid methyl emaw ethyl ester ah an chantir a, biodiesel an siam chhuak a,energy sector tan renewable resources an pe chhuak thin.
hot tags .: A rilru a buai em em a, a rilru a hah em em bawk a, a rilru a buai em em bawk a, a rilru a hah em em bawk a., China, Manufacters, Price, Quotation, Free Sample

